How do I put holes in a concrete fence post?

​Draw a circle around that hole to mark the outside circumference of the circle you’re going to excavate. Step 2: ​Drill holes around and along the circumference, spaced an inch or two apart. Drill some more holes throughout the middle area of the circle.

How do you drill holes in fence posts? You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger.

What is the best fence post digger?

Are auger post hole diggers any good? If you want to do some serious post hole digging and buy the best tool at a great price, the GardenTrax 43CC Earth Auger is the one for you. Not only is it large and powerful, but it costs at least 20 percent less than most similarly powerful units.

What tool is used to dig post holes?

How big of a hole do you need for a 4×4 post?

The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter.

How do I put holes in a concrete fence post? – Related Questions

How deep should fence post holes be?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

Do manual post hole diggers work?

For long swathes of new fencing, manual post hole diggers are a lot of work, but they are much more efficient than digging holes out with a spade and also give you neater edges so if you decide to use cement to set your fence posts, you’ll have a better set a the base as a result with less soil dilution on the edges.

What is the difference between a post hole digger and an auger?

The difference between an auger and a digger comes down to the shape. An auger basically looks like a giant corkscrew, and they create a hole by pushing the dirt down. Post hole diggers look like two shovels facing each other, and they create a hole by scooping and removing the dirt.

How many bags of cement do I need for a fence post?

1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.

What is the easiest way to dig a post hole?

Will a post hole auger cut through roots?

Post hole diggers are not capable of cutting through large roots, and it is time consuming to try and chop the root out by hand. The most effective method of installing a post through a root is to drill through it.

How deep can you dig with a post hole digger?

Post hole diggers have a maximum effective depth of about 3/4 of their handle length, so a five foot pair will dig about 3 1/2 half deep. Very hard earth like clay is extremely difficult to dig with a manual pair of post hole diggers.

Can I dig a post hole with a shovel?

With the turf removed, a long-handled shovel does a good job of removing the dirt. Dig with the blade plumb and the handle pushed forward to keep the walls of the hole straight up and down.

How long does it take to dig a fence post hole?

Post Hole Digging Tools In such soil, it can dig a 4-foot-deep hole that is the perfect size for a fence post in a matter of minutes.

How far apart are fence posts?

Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

Should fence posts be set in concrete?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

Is 18 inches deep enough for a fence post?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

Why do fence posts rot at ground level?

Wood fence posts will rot due to prolonged exposure to moisture in the soil.

Can you set a post with dry concrete?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

How deep should an 8ft fence post be?

For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.

How long should posts be for a 6 foot fence?

Calculate the post lengths If you’re setting wooden or concrete posts in concrete you’ll need 8ft (2.4m) posts for a 6ft (1.828m) fence – i.e. your posts are 2ft (0.6m) longer than the fence height. Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.

How do you make a post hole digger?

How do you dig a post hole in the winter?

What is a post hole shovel?

Long Timber Handle | Square Mouth. The Cyclone Post Hole Shovel is a good general-purpose shovel for digging, clearing deep narrow holes, pits, fencing and shallow trenches.

What size auger do I need for fence posts?

How do you dig a post hole in hard ground?

How do you drill a hole in a 4×4?

How do I drill a hole in pressure treated wood?