There’s no question about it — the fastest and easiest way to dig post holes is to use a gas-powered earth auger. Fill the tank with gas, position the auger on the ground, fire it up, hold on tight and watch the soil come streaming out of the hole.
What is the best tool for digging post holes? You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger.
Is a post hole digger worth it? While that won’t make a lot of difference if you have loamy, soft soil to begin with, for those who have hard-packed clay soils it certainly does. If your soil is very solid, or has a lot of rocks, a post hole digger is an essential tool to have.
What is the difference between an auger and a post hole digger? Q: What is the difference between an auger and a post hole digger? The difference between the two is in how they dig holes. You thrust a traditional post hole digger into the ground and remove the soil between the scoops. An auger “screws” into the ground and transports dirt along the blade up to the surface.
How deep should a post hole be? Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
What is the fastest way to dig a fence post hole? – Related Questions
How big of a hole do you need for a 4×4 post?
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter.
How deep can you dig with a post hole auger?
How Deep Can Power Augers Dig? Most augers dig about 3 ft. deep, but for deeper holes, ask for an extension rod (Photo 5), usually for no extra fee. Deeper holes are typically required for footings for decks or other structures attached to houses located in very cold climates where frost depths exceed 3 ft.
How deep can you dig with a post hole digger?
Post hole diggers have a maximum effective depth of about 3/4 of their handle length, so a five foot pair will dig about 3 1/2 half deep. Very hard earth like clay is extremely difficult to dig with a manual pair of post hole diggers.
Can I use a shovel to dig a post hole?
With the turf removed, a long-handled shovel does a good job of removing the dirt. Dig with the blade plumb and the handle pushed forward to keep the walls of the hole straight up and down.
How deep should a 16 foot post be in the ground?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
Should fence posts be set in concrete?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
How deep should a 8 foot fence post be?
For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
Do manual post hole diggers work?
For long swathes of new fencing, manual post hole diggers are a lot of work, but they are much more efficient than digging holes out with a spade and also give you neater edges so if you decide to use cement to set your fence posts, you’ll have a better set a the base as a result with less soil dilution on the edges.
How do you dig a post hole in hard ground?
- Step 1: String your line and pound the stakes. …
- Step 2: Carve out a soil divot with a spade. …
- Step 3: Loosen earth with a tile shovel. …
- Step 4: Use your clamshell digger. …
- Step 5: Use a reciprocating saw on large roots. …
- Step 6: Dislodge rocks with a digging bar. …
- Step 7: Tamp the soil with the other end.
How do I keep my post level while concrete dries?
You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.
Why do fence posts rot at ground level?
Wood fence posts will rot due to prolonged exposure to moisture in the soil.
Is 3 feet deep enough for fence posts?
As a general rule of thumb one-third of your post should be underground, the other two-thirds above. Let’s take a standard 6foot (72 inches) fence as an example. You will need a 9foot (108 Inches) post so that 3ft (35 inches) can be underground and 6ft can be above ground.
How many bags of concrete do I need for a 4×4 post?
| Depth | 50 Lb Bags |
|---|---|
| 10″-14″ | 2 |
| 16″-22″ | 3 |
| 24″30″ | 4 |
| 32″36″ | 5 |
Can pressure treated posts be set in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow.
How deep should a 6×6 post be in the ground?
How deep should a post be in the ground:– in general, a post 6×6 or 8×8 that extend 8 feet or more above ground level should be at least 3 feet deep buried in the ground. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
What is the easiest way to dig a deep hole?
What is the fastest way to dig a hole in a shovel?
How long does it take to dig a post hole with an auger?
Augers are available for rent at tool rental centers at a cost of around $60 a day. Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.
Is it easier to dig wet or dry soil?
Soil that’s turned over when wet will form clods that will be very difficult to break apart later, Trinklein said. This is because wet soil is more easily compacted than dry soil. He recommends the “baseball test” before you start digging.
How long does it take to dig a 6 foot hole by hand?
This means it takes 4.24 minutes to dig a 6 foot deep hole of 16 inches diameter.
Can a post hole digger go through roots?
Post hole diggers are not capable of cutting through large roots, and it is time consuming to try and chop the root out by hand. The most effective method of installing a post through a root is to drill through it.
How do you make a post hole digger?
How much concrete does it take to fill a post hole?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
How do you dig a fence post next to your house?
Typically, in part to ensure that posts lodge below the frost line, experts call for a hole deep enough to submerge the bottom third of the post below ground. For a six-foot-tall post, therefore, you would dig a hole two feet deep. The ideal diameter, meanwhile, should measure three times the width of the post.
What is the easiest way to dig a hole?
What do you need to dig a hole in the ground?
How do you make holes in fence posts?
What do you use to dig clay?
To make digging the pilot holes easier, use a tile shovel. It will slice through grass and clay more easily than other shovel types. Place the soil you dig up on a tarp so it will be easy to backfill the hole with and carry off the excess.
