What is the easiest way to dig a hole?

What is the best tool for digging post holes? You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger.

Is a post hole digger worth it? While that won’t make a lot of difference if you have loamy, soft soil to begin with, for those who have hard-packed clay soils it certainly does. If your soil is very solid, or has a lot of rocks, a post hole digger is an essential tool to have.

Should I use an auger or post hole digger? Post hole diggers focus on one task – they dig holes for posts, whereas a hole auger is suited for a wide variety of tasks around the garden. Post hole diggers rely on more work than a hole auger, these heavy hand tools are basically thrown hard into the soil with force then lifted out.

Can I use an ice auger to dig post holes?

How deep should a post hole be? Project Instructions Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

What is the easiest way to dig a hole? – Related Questions

How big of a hole do you need for a 4×4 post?

The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter.

How deep can you dig with a post hole digger?

Post hole diggers have a maximum effective depth of about 3/4 of their handle length, so a five foot pair will dig about 3 1/2 half deep. Very hard earth like clay is extremely difficult to dig with a manual pair of post hole diggers.

How deep can you dig with a post hole auger?

If you’re wondering how deep can a post-hole digger dig, the answer depends on the application and the tool. Most augers dig about 3 feet deep, but an extension rod can be used to gain another 12 inches of depth.

Will a post hole auger cut through roots?

Post hole diggers are not capable of cutting through large roots, and it is time consuming to try and chop the root out by hand. The most effective method of installing a post through a root is to drill through it.

How long does it take to dig a post hole with an auger?

Augers are available for rent at tool rental centers at a cost of around $60 a day. Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.

Will an auger go through rock?

Augers are very powerful machines with a lot of torque that can throw you like a sack of potatoes if the auger bit encounters a rock or a root. If your soil is loamy or sandy, you too can drill 30 holes in a day’s worth of rental. But rocky ground or heavy clay can stymie even the most powerful auger.

How do you dig holes quickly?

Can you use a Jiffy ice auger to drill post holes?

I’ve used my old Jiffy many times for digging post holes. If you hit a big tree root or rock it gets a little hairy but for the most part works great! I just use an old ice blade and haven’t had any trouble. I had the same thought so last week I bought the earth auger at menards, brought it home, hooked up to my Jiffy.

Can I use an earth auger for ice?

We used a earth auger powerhead and a homemade collar to attach a hand auger drill to it for a few years, it worked. That would be my suggestion if you want to use it for ice, find a used hand auger and make an adapter collar so it fits the shaft coming out of the powerhead of the earth auger. It’s an option!

How do you use a fence post auger?

Why do fence posts rot at ground level?

Wood fence posts will rot due to prolonged exposure to moisture in the soil.

Should fence posts be set in concrete?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

How do I keep my post level while concrete dries?

You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.

How many bags of concrete do I need for a 4×4 post?

Is 18 inches deep enough for a fence post?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

How far apart do fence posts need to be?

Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

Is it easier to dig wet or dry soil?

Soil that’s turned over when wet will form clods that will be very difficult to break apart later, Trinklein said. This is because wet soil is more easily compacted than dry soil. He recommends the “baseball test” before you start digging.

How long does it take to dig a 6 foot hole by hand?

This means it takes 4.24 minutes to dig a 6 foot deep hole of 16 inches diameter.

What is the fastest way to dig a hole in a shovel?

How do you dig fence posts in hard ground?

Can you use an auger in wet soil?

Especially if conditions are wet, the grass and vegetation may clog the end of the auger, sticking in place and making it impossible for the blades to get a grip on the soil below. Save yourself some time (and your auger a little trouble) by using a shovel to remove sod before you drill.

Are petrol post hole diggers any good?

Are petrol augers actually any good? YES, I’ve used one to drill out for over 100 posts once in a day. Try doing that by hand! Not only that, it’s such a uniform sized hole you create that you can accurately calculate how much concrete you’ll need for posts over a long run of holes so a real advantage all round.

How big of a hole do I need for a 6×6 post?

A 6×6 post requires a 10″-diameter hole. Shovel a 6″ layer of gravel into the hole to provide drainage.

How do you dig thick roots?

By keeping the edge of your shovel or spade sharp, you can cut through smaller roots. But when they are thicker than your finger, you will want to use a better tool. If your hole is shallow, a cheap hatchet works well. If the root is really big, a saw may be the easiest thing to use.

What is the best tool to cut tree roots?

What do you need to dig a hole in the ground?

How do you make holes in fence posts?

What do you use to dig clay?

To make digging the pilot holes easier, use a tile shovel. It will slice through grass and clay more easily than other shovel types. Place the soil you dig up on a tarp so it will be easy to backfill the hole with and carry off the excess.