- BEST OVERALL: Southland SEA438 One Man Earth Auger.
- BEST BANG FOR THE BUCK: XtremepowerUS 1200W 1.6HP Electric Post Hole Digger.
- UPGRADE PICK: Landworks Earth Auger Power Head Steel 6″ x 30″ Bit.
- BEST MANUAL: AMES 2701600 Post Hole Digger with Hardwood Handle.
Is a post hole digger worth it? While that won’t make a lot of difference if you have loamy, soft soil to begin with, for those who have hard-packed clay soils it certainly does. If your soil is very solid, or has a lot of rocks, a post hole digger is an essential tool to have.
How deep can a 3 point post hole digger go?
It’s the perfect tool for creating accurate holes quickly. Simply attach the post hole digger to your 3-point hitch for heavy duty hole digging, and get your jobs done fast. You can dig deep, too, since this equipment can drill to a depth of 40 inches.
What fuel does a predator auger use?
| Maximum Bit Size | 10″ Diameter x 39″ Long | |
|---|---|---|
| Fuel | Type | 87+ octane stabilizer-treated unleaded gasoline mixed with 2-cycle oil (see below) |
| Capacity | 0.3 Gallon | |
| Oil | Type | 2-cycle oil (designed specifically for mixing with gasoline) |
| Ratio | 50:1 gasoline-to-oil ratio 2.5 fl-oz oil per gallon of gasoline |
How big of a hole do you need for a 4×4 post?
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter.
What is the best fence post digger? – Related Questions
How deep should a post hole be?
Project Instructions Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
What is the best gas post hole digger?
- ECO LLC 52cc 2.4HP Gas Powered Post Hole Digger. Price: $269.99. …
- Pumplus Gas Powered 52CC Post Hole Digger. Price: $249.99. …
- Tazz 35365 Earth Auger/Post Hole Digger. Price: $249.99. …
- Southland SEA438 One Man Earth Auger. Price: $224.99. …
- Proyama 51.7CC 2 Stroke Gas Post Hole Digger. Price: $329.00.
Are petrol post hole diggers any good?
Are petrol augers actually any good? YES, I’ve used one to drill out for over 100 posts once in a day. Try doing that by hand! Not only that, it’s such a uniform sized hole you create that you can accurately calculate how much concrete you’ll need for posts over a long run of holes so a real advantage all round.
What is the best tool for digging post holes?
You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger.
How deep can a one man auger dig?
The available depths for an auger are generally 3 and 4 feet–but there are augers that exist that allow you to drill with more width and depth. Those wielding a one-man auger shouldn’t use it for any holes exceeding 8 inches in diameter. Whereas two-man augers get the job done for a maximum of 18 inches in diameter.
How do you sharpen a post hole auger bit?
How do you dig a straight hole with an auger?
Can an auger dig through frozen ground?
The frost ended up being about 2.5 feet deep. With the nearly 3,000 pounds of down pressure we were able to auger post holes in frozen ground much easier than without using it. I hope this demonstration proves that with the proper equipment it is easy to dig through frozen ground.
Do manual post hole diggers work?
For long swathes of new fencing, manual post hole diggers are a lot of work, but they are much more efficient than digging holes out with a spade and also give you neater edges so if you decide to use cement to set your fence posts, you’ll have a better set a the base as a result with less soil dilution on the edges.
How do you use a gas powered post hole digger?
Can you put dry concrete in a post hole?
Should fence posts be set in concrete?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
How many bags of concrete do I need for a 4×4 post?
| Depth | 50 Lb Bags |
|---|---|
| 10″-14″ | 2 |
| 16″-22″ | 3 |
| 24″30″ | 4 |
| 32″36″ | 5 |
Why do fence posts rot at ground level?
Wood fence posts will rot due to prolonged exposure to moisture in the soil.
Is 3 feet deep enough for fence posts?
As a general rule of thumb one-third of your post should be underground, the other two-thirds above. Let’s take a standard 6foot (72 inches) fence as an example. You will need a 9foot (108 Inches) post so that 3ft (35 inches) can be underground and 6ft can be above ground.
How deep should I bury a 10 foot post?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
What is the difference between a post hole digger and an auger?
Post hole diggers focus on one task – they dig holes for posts, whereas a hole auger is suited for a wide variety of tasks around the garden. Post hole diggers rely on more work than a hole auger, these heavy hand tools are basically thrown hard into the soil with force then lifted out.
Will a post hole auger cut through roots?
Post hole diggers are not capable of cutting through large roots, and it is time consuming to try and chop the root out by hand. The most effective method of installing a post through a root is to drill through it.
How long does it take to dig a post hole?
Post Hole Digging Tools In such soil, it can dig a 4-foot-deep hole that is the perfect size for a fence post in a matter of minutes.
How do you dig a post hole in the winter?
What is an auger in the UK?
Auger is an independent specialist serving the insurance industry for drainage and water mains claims across the UK.
How deep should a 8 foot fence post be?
For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
What is the fastest way to dig a hole in a shovel?
How long does it take to dig a 6ft hole?
It takes 0.07 hours (4.24 minutes) to dig 1.23 cubic yards of earth in stable soil. This means it takes 4.24 minutes to dig a 6 foot deep hole of 16 inches diameter.
Should I use an auger or post hole digger?
Post hole diggers focus on one task – they dig holes for posts, whereas a hole auger is suited for a wide variety of tasks around the garden. Post hole diggers rely on more work than a hole auger, these heavy hand tools are basically thrown hard into the soil with force then lifted out.
Do post hole diggers work?
Digging holes for fence posts or footings requires a different tool because the holes should be deep and cylindrical with sides that are flared at the bottom. A clamshell digger (also called a post hole digger) is a good tool for this type of work.
What is the best tool for digging post holes?
You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger.
Do manual post hole diggers work?
For long swathes of new fencing, manual post hole diggers are a lot of work, but they are much more efficient than digging holes out with a spade and also give you neater edges so if you decide to use cement to set your fence posts, you’ll have a better set a the base as a result with less soil dilution on the edges.
