What is a ground hog HD99?

The Ground Hog HD99 is a Towable Hydraulic Earthdrill that is designed to be powerful, easy to use and require very little maintenance. The HD99 is the most powerful earthdrill in the Ground Hog line. With it’s 9hp Honda or Subaru engine, the HD99 can easily dig with any Ground Hog auger up to 18 inches in diameter.

How deep can a towable auger dig? An auger can drill holes as deep as 95 feet and as shallow as 3 feet. However, once the depth goes beyond 95 feet, you can add an extension rod to the auger.

How much does a tow behind auger weigh?

295 lbs.
6″,8″,10″,12″ augers are available….Description.
Auger Speed 140 rpm @ 3600 engine rpm (no load)
Weight 295 lbs. (134 kg) (with fluids)
Length Normal Drilling 100 inches(253 cm)

5 more rows

How do you start a towable hydraulic auger?

Will a hydraulic auger go through roots? An auger resembles a large drill, but it is heavy, and it will throw you when it hits the root.

What is a ground hog HD99? – Related Questions

Can you use an auger in wet soil?

Especially if conditions are wet, the grass and vegetation may clog the end of the auger, sticking in place and making it impossible for the blades to get a grip on the soil below. Save yourself some time (and your auger a little trouble) by using a shovel to remove sod before you drill.

How do you use the towable Auger?

How do you use a groundhog Auger?

How do you use a post hole digger?

How long does it take to dig a post hole with an auger?

Augers are available for rent at tool rental centers at a cost of around $60 a day. Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.

  How deep should a post hole be?

Will an auger go through rock?

Augers are very powerful machines with a lot of torque that can throw you like a sack of potatoes if the auger bit encounters a rock or a root. If your soil is loamy or sandy, you too can drill 30 holes in a day’s worth of rental. But rocky ground or heavy clay can stymie even the most powerful auger.

How do you sharpen a post hole auger bit?

How do you get a stuck auger out of the ground?

How to get an auger unstuck out of the ground
  1. Wiggle the auger. Try a combination of small clockwise and anticlockwise motions whilst applying a wiggling motion in order to gradually get past the obstacle.
  2. Dampen the soil. …
  3. Remove surface soil. …
  4. Use a crow bar. …
  5. Avoid force. …
  6. Use a wider handle. …
  7. Using two people. …
  8. Check for damage.

How does a hydraulic auger work?

What is a ground hog HD99?

A hydraulic auger works by transferring hydraulic pressure into kinetic energy via the drill stem. On either end of the drill, the stem is pistons connected with an internal piston rod. They are connected to a hydraulic cylinder at the top and a winch at the bottom.

What is a ground hog tool?

What is a ground hog tool?

3 in 1 Digging Tool, a.k.a. The Groundhog. This tool has 2.5″ trowel on one end, a hammer head for pounding stakes on the other, and a steel blade for cutting roots. This tool does it all and is built to last a lifetime !

What is the best tool to cut tree roots?

Which five tools do you need to remove trees and tree roots?
  • Pole pruner. Before you get to chop down the tree’s main trunk, you may want to snip a few branches. …
  • Chainsaw. Chainsaws are perfect for felling trees, as well as pruning and thinning out branches. …
  • Stump grinder. …
  • Wood chipper/shredder. …
  • Mini digger.
  How do you use a Ryobi p4001 drain auger?

Can you use an auger to remove a tree stump?

Similar to prepping the stump for just water, the tree must be drilled with an auger bit to form several holes. Instead of just putting water in the holes, you’ll first put in a liberal amount of potassium nitrate. Then fill the holes with water. Using potassium nitrate still takes time, even if it’s a lesser amount.

How do you dig thick roots?

By keeping the edge of your shovel or spade sharp, you can cut through smaller roots. But when they are thicker than your finger, you will want to use a better tool. If your hole is shallow, a cheap hatchet works well. If the root is really big, a saw may be the easiest thing to use.

Should you wet the ground before using an auger?

Soften the soil Any tough, hardened soil can be softened prior to digging by soaking the area with water to prevent the auger getting stuck in the ground.

Is it worth buying an auger?

An auger gets the job done quicker than a shovel while allowing the operator to stand upright. Because the auger is meant to be held stationary as the hole is bored, there is less stress placed on the hands and arms, as well. For health reasons alone, augers are a worthwhile investment.

Should you wet dirt before digging?

Soil that’s turned over when wet will form clods that will be very difficult to break apart later, Trinklein said. This is because wet soil is more easily compacted than dry soil. He recommends the “baseball test” before you start digging.

How do you make an auger?

What is a little beaver?

Do augers work in clay soil?

Augers are also great for soil that is tough to dig. Heavy clay soils, which tend to clump and stick to shovels, are no problem with an auger.

  What is a groundhog HD99?

Do groundhogs destroy lawns?

They can destroy gardens and crops extremely quickly, eating up to a pound of vegetation a day. Their extensive burrowing and tunneling can create large holes in turf, lawns, and lands that can damage farm equipment and or be potentially dangerous for riders on horseback.

What is the best tool for digging post holes?

What is the best tool for digging post holes?

You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger.

How big of a hole do you need for a 4×4 post?

How do you start a billy goat blower?
12 inches

The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter.

What is the fastest way to dig a hole in a shovel?

How deep will a tractor auger go?

How deep can a tractor auger go? In most cases, they can go up to three feet into the ground.

How do you dig a post hole in hard ground?

How to Dig a Hole: Pro Tips
  1. Step 1: String your line and pound the stakes. …
  2. Step 2: Carve out a soil divot with a spade. …
  3. Step 3: Loosen earth with a tile shovel. …
  4. Step 4: Use your clamshell digger. …
  5. Step 5: Use a reciprocating saw on large roots. …
  6. Step 6: Dislodge rocks with a digging bar. …
  7. Step 7: Tamp the soil with the other end.
Share your love