Augers are available for rent at tool rental centers at a cost of around $60 a day. Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.
How do you auger a fence post hole?
What size auger do I need for fence posts? A 12-inch auger, best attached to a heavy machine, will create a hole large enough for a 6×6 or 4×6 post and plenty of concrete. Smaller augers, like 4- or 6-inch options, are appropriate for light-duty work (like mailboxes) as well as metal fence posts for chain-link fences.
Can you use an auger to dig a hole? So what is an Auger? Augers are very powerful machines with a lot of torque that can throw you like a sack of potatoes if the auger bit encounters a rock or a root. If your soil is loamy or sandy, you too can drill 30 holes in a day’s worth of rental.
Can I use an auger for fence posts? You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger.
What is the easiest way to dig a post hole?
- Step 1: String your line and pound the stakes. …
- Step 2: Carve out a soil divot with a spade. …
- Step 3: Loosen earth with a tile shovel. …
- Step 4: Use your clamshell digger. …
- Step 5: Use a reciprocating saw on large roots. …
- Step 6: Dislodge rocks with a digging bar. …
- Step 7: Tamp the soil with the other end.
How long does it take to dig a fence post hole with an auger? – Related Questions
How deep should fence post holes be?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How big of a hole do I need for a 4×4 fence post?
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter.
How deep should a 7 foot fence post be?
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
How deep can you dig with a post hole auger?
If you’re wondering how deep can a post-hole digger dig, the answer depends on the application and the tool. Most augers dig about 3 feet deep, but an extension rod can be used to gain another 12 inches of depth.
Do manual post hole diggers work?
For long swathes of new fencing, manual post hole diggers are a lot of work, but they are much more efficient than digging holes out with a spade and also give you neater edges so if you decide to use cement to set your fence posts, you’ll have a better set a the base as a result with less soil dilution on the edges.
How do you make a post hole auger?
Should fence posts be set in concrete?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
How long does it take to dig a post hole with an auger?
Augers are available for rent at tool rental centers at a cost of around $60 a day. Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.
Is it easier to dig wet or dry soil?
Soil that’s turned over when wet will form clods that will be very difficult to break apart later, Trinklein said. This is because wet soil is more easily compacted than dry soil. He recommends the “baseball test” before you start digging.
Why do fence posts rot at ground level?
Wood fence posts will rot due to prolonged exposure to moisture in the soil.
Is 18 inches deep enough for a fence post?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
How many bags of cement do I need for a fence post?
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
How deep is a 6ft fence post?
As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground. Consider the frost line in your area.
Can you set a post with dry concrete?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How far apart should fence posts be set?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
How do I make sure fence posts are in line?
Are auger post hole diggers any good?
If you want to do some serious post hole digging and buy the best tool at a great price, the GardenTrax 43CC Earth Auger is the one for you. Not only is it large and powerful, but it costs at least 20 percent less than most similarly powerful units.
What is the difference between a post hole digger and an auger?
Post hole diggers focus on one task – they dig holes for posts, whereas a hole auger is suited for a wide variety of tasks around the garden. Post hole diggers rely on more work than a hole auger, these heavy hand tools are basically thrown hard into the soil with force then lifted out.
How long does it take to dig a 6 foot hole by hand?
This means it takes 4.24 minutes to dig a 6 foot deep hole of 16 inches diameter.
What is the fastest way to dig a hole in a shovel?
How do you use a hand post hole auger?
Do augers work in rocky soil?
For drilling in rocky soils, always recommend heavy-duty augers to avoid damage. These augers are equipped with a more durable tooth and side cutting blades as well as heavy-duty flighting.
