How do you read a nozzle size?

In all cases the first two digits of the nozzle number indicate the spray angle (disperse) in degrees. EXAMPLE: 00 is 0 degree, 15 is 15 degree, 25 is 25 degree and 40 is 40 degree. The last two digits of the nozzle number indicate the orifice size, a standard industry designation.

Are pressure washer nozzle tips Universal? Nozzles are manufactured specifically for each machine’s volume and pressure. This means that each nozzle size has a different size orifice (or opening). There are a variety of sizes but the most commonly used are between 3.0 to 6.5, sized in .

What pressure washer nozzle should I use? White 40° Nozzle The 40° White pressure washer nozzle gives you the widest spray pattern. Use this tip for spraying and hosing down the car, washing windows, and anywhere you want to rinse something off.

How do I know what size pressure washer nozzle I need?

Is a turbo nozzle worth it? Turbo nozzles have been one of the most important accessories developed. These efficient tools provide the power of a zero-degree pattern. The circular motion also adds extra agitation to cleaning tough jobs like caked-on mud. They are designed to provide a 200% cleaning efficiency over a 25-degree flat fan nozzle.

What color tip is the strongest for pressure washer?

Red Spray Tip (0-Degrees) The red spray tip creates a 0-degree spray pattern and is the most powerful nozzle of them all. You need to be very careful using this tip to make sure you don’t cause any damage to the surface you are cleaning.

How do you read a nozzle size? – Related Questions

What each pressure washer nozzle is used for?

Degrees of Cleaning 25° Green-Nozzle – Used for normal washing/cleaning to remove common dirt, mud and stain from surfaces. 40° White-Nozzle – Used for rinsing and light cleaning of windows, roofs, automobiles, boats etc. Black Nozzle – Uses a lower PSI and wider spray for soap application.

What is a 15 degree nozzle used for?

Yellow-Colored 15 Degree Nozzle Typically used for surface preparation such as removing dirt, mildew or paint, and can be used on most surfaces.

Do high pressure hose nozzles work?

The Big Shot high pressure hose nozzle does a great job of recreating a high pressure washer. The stream can be focused to a thin stream which is perfect for cleaning a small area. It is also very economical both in price and size.

How do I choose a spray nozzle?

Selecting Your Nozzle Size You’ll want to determine the nozzle flow rate at gallons per minute (gpm). To find that, start with your application rate in gallons per acre (gpa). Next, find an efficient and safe ground speed in miles per hour (mph). Then, determine the spray width per nozzle (W).

Are pressure washer attachments universal?

The quick answer is no, they are not universal. The reason for this is that wands built for electric machines are made of different materials than those built for gas pressure washers. As well as, the fittings and connectors can be different and will need to be matched up to your machine.

What does nozzle size mean?

The orifice size of the nozzle determines the operating pressure of your machine. As a rule of thumb, the smaller the orifice, the greater the restriction of water flowing through the machine. This causes the pressure to increase. Choosing a nozzle with too large of an orifice will reduce operating pressure.

Will a turbo nozzle remove paint?

You may also be able to use a turbo nozzle when pressure washing to remove exterior paint. The turbo nozzle combines the force of a 0-degree nozzle with the spray area of a 25-degree area along with a rotating head that pulses water at speeds between 1800 rpm to 3000 rpm.

When should I use pressure washer turbo nozzle?

You would use a turbo nozzle when tackling a stubborn cleaning job. The higher power will help you clean up mold, dirty concrete, caked-on mud, oil stains, etc.

Does pressure washer nozzle change PSI?

Each nozzle you add to the wand changes the width of the spray—in a wider or narrower “V”—depending on what degree angle the nozzle is designed to provide. For example, selecting a nozzle with a narrow spray (a low-degree nozzle) will give you more pressure—PSI—in your spray, but over a smaller area.

What do the colors on spray tips mean?

The first color scheme, the color of the spray nozzle tip, describes the capacity (flow rate) of the nozzle orifice at 40 PSI and is based on Standard 10625 of the International Standards Organization (ISO) (Table 1). Nozzle flow rates are mainly a function of orifice size & pressure.

How can I make my pressure washer stronger?

In general, a pressure washer can be made more powerful by using a different nozzle. Other options are changing the pressure regulator or under loader valve, use a different gas type, or optimizing the gas engine. For maximum power, use a red 0-degree nozzle. Nozzles determine the angle of the output water stream.

What do the numbers on spray nozzles mean?

Most companies identify their flat-fan nozzles with a four or five digit number (Figure 2). The first numbers are the spray angle and the other numbers signify the discharge rate at rated pressure. For example, an 8005 has an 80 degree spray angle and will apply 0.5 gallons per minute (GPM) at rated pressure of 40 psi.

How do you measure a spray nozzle?

What are the different color nozzle for pressure washer?

What is 25 degree pressure washer tip for?

Green 25° The green, 25 degree nozzle is typically used for sweeping away dirt and mud. This nozzles larger 25 degree pattern can clean the widest variety of surfaces and also allows for good impact pressure and cleaning coverage.

What do the degrees mean on pressure washer nozzles?

Nozzles Explained For example, a 15° angle is a fairly narrow V, while a 40° is significantly wider. With a narrower spray (a low-degree nozzle), you get more pressure in your spray, but it is spread over a small area. With a wider spray (a higher-degree nozzle) you get less pressure, but it covers more area.

What angle should a pressure washer be?

They’ve revolutionized the way we maintain homes, driveways, fences, patios, and even cars, making it easier than ever before. To get the maximum cleaning power from your pressure washer, you should keep the tip at a 90-degree angle. Any other angle will weaken the spray, making proper cleaning difficult.

Can I turn my hose into a pressure washer?

The Turbo Jet Power Washer turns any hose into a power washer! Blast away dirt, grime, mold from wood, aluminum and vinyl siding, concrete, brick, stone, and so much more. The Turbo Jet puts the power of a professional power washer in your hands!

Can you put a pressure washer nozzle on a garden hose?

A pressure washer attachment for a garden hose is a useful tool to have around the house. You can use the different pressure settings for washing the car, watering the lawn, cleaning the driveway and sidewalk, washing the deck and so much more.

What is the PSI of a garden hose?

The PSI rating on garden hoses is the amount of pressure the hose can safely handle. Lower-quality hoses are rated around 200 PSI, and high-quality hoses can be rated up to 600 PSI.

Are pressure washer attachments universal?

The quick answer is no, they are not universal. The reason for this is that wands built for electric machines are made of different materials than those built for gas pressure washers. As well as, the fittings and connectors can be different and will need to be matched up to your machine.

How do you put a nozzle on a pressure washer?

What are the different color nozzle for pressure washer?

What is the green tip on a pressure washer?

Green nozzles have a spray pattern of 25 degrees. They produce a moderately powerful spray and a flushing or sweeping effect. This attachment is perfect for power washing vehicles with fine finishes.