What size auger do I need for fence posts? A 12-inch auger, best attached to a heavy machine, will create a hole large enough for a 6×6 or 4×6 post and plenty of concrete. Smaller augers, like 4- or 6-inch options, are appropriate for light-duty work (like mailboxes) as well as metal fence posts for chain-link fences.
Can I use an auger for fence posts? When it comes to digging fence post holes for a new pasture, augers are the way to go. Whether you’re using a handheld auger or (better yet) a tractor-mounted model, augers significantly speed up and simplify the process compared to manual post-hole diggers.
What is the easiest way to dig a post hole?
- Step 1: String your line and pound the stakes. …
- Step 2: Carve out a soil divot with a spade. …
- Step 3: Loosen earth with a tile shovel. …
- Step 4: Use your clamshell digger. …
- Step 5: Use a reciprocating saw on large roots. …
- Step 6: Dislodge rocks with a digging bar. …
- Step 7: Tamp the soil with the other end.
Do augers work in rocky soil? For drilling in rocky soils, always recommend heavy-duty augers to avoid damage. These augers are equipped with a more durable tooth and side cutting blades as well as heavy-duty flighting.
How deep should a fence post hole be?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How do you drill holes in a rock fence post? – Related Questions
How deep should a 7 foot fence post be?
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
How big of a hole do you need for a 4×4 post?
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter.
How long does it take to dig a fence post hole with an auger?
Augers are available for rent at tool rental centers at a cost of around $60 a day. Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.
How deep can a one man auger dig?
The available depths for an auger are generally 3 and 4 feet–but there are augers that exist that allow you to drill with more width and depth. Those wielding a one-man auger shouldn’t use it for any holes exceeding 8 inches in diameter. Whereas two-man augers get the job done for a maximum of 18 inches in diameter.
Should fence posts be set in concrete?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
Do manual post hole diggers work?
For long swathes of new fencing, manual post hole diggers are a lot of work, but they are much more efficient than digging holes out with a spade and also give you neater edges so if you decide to use cement to set your fence posts, you’ll have a better set a the base as a result with less soil dilution on the edges.
How do you dig a fence post next to your house?
Typically, in part to ensure that posts lodge below the frost line, experts call for a hole deep enough to submerge the bottom third of the post below ground. For a six-foot-tall post, therefore, you would dig a hole two feet deep. The ideal diameter, meanwhile, should measure three times the width of the post.
How do you drive fence posts in rocky ground?
If terrain is too rocky to set wood posts, you can usually put steel posts in deep enough to hold, using rock baskets every so often for braces. Another strategy for rocks or frozen ground when using a post-pounder is to create a pilot hole.
Can an auger go through gravel?
Hold the auger firmly with both hands. Press the trigger throttle slowly to start the auger turning and to begin drilling through the gravel and soil. Apply downward pressure as the auger turns.
How do I keep my post level while concrete dries?
You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.
Why do fence posts rot at ground level?
Wood fence posts will rot due to prolonged exposure to moisture in the soil.
How many bags of cement do I need for a fence post?
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
How far apart should fence posts be set?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
How long do wooden fence posts last?
While treated timber posts can last from anywhere between 10-15 years, untreated timber may need replacing in under 5 years. What’s more, rotting, splitting and warping (where the post expands upon water absorption) are all very common occurrences for wooden fence post systems.
Is 18 inches deep enough for a fence post?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
Will auger go through concrete?
Mechanical and Adhesive masonry anchors require a pre-drilled hole. Our Concrete Auger Bits are an excellent choice for preparing the anchoring hole. Specifically for use in drilling clearance holes through concrete, block, brick and stone.
How many post holes can you dig in a day?
Augers are very powerful machines with a lot of torque that can throw you like a sack of potatoes if the auger bit encounters a rock or a root. If your soil is loamy or sandy, you too can drill 30 holes in a day’s worth of rental.
Should I use an auger or post hole digger?
Post hole diggers focus on one task – they dig holes for posts, whereas a hole auger is suited for a wide variety of tasks around the garden. Post hole diggers rely on more work than a hole auger, these heavy hand tools are basically thrown hard into the soil with force then lifted out.
How do you dig holes in a 4×4 post?
In general, the post hole should be one third as deep as the fence is tall. So, if you’re installing a 6-foot tall fence, your post hole should be at least two feet deep. You’ll also want to be sure the bottom of the post sits below the frost line.
Is it worth buying an auger?
An auger gets the job done quicker than a shovel while allowing the operator to stand upright. Because the auger is meant to be held stationary as the hole is bored, there is less stress placed on the hands and arms, as well. For health reasons alone, augers are a worthwhile investment.
Is a one man auger easy to use?
Gas augers are the most common and typically have more horsepower than electric augers. One-man augers are smaller and less powerful than two-man augers, which require two strong people to operate. How hard is it to use a one-man auger? Harder than you might think, especially if the soil is rocky or made of heavy clay.
Are petrol post hole diggers any good?
Are petrol augers actually any good? YES, I’ve used one to drill out for over 100 posts once in a day. Try doing that by hand! Not only that, it’s such a uniform sized hole you create that you can accurately calculate how much concrete you’ll need for posts over a long run of holes so a real advantage all round.
Is an 8 inch hole big enough for 4×4 fence post?
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.
What size auger do I need?
To choose the auger that best fits your needs, consider how you’ll use it. If you plan on only using your auger to plant plugs, for instance, then a 2- or 3-inch auger will fit your needs. If you anticipate the need to bury stakes or set small posts, then you may prefer a 4-inch auger or another, larger size.
How big of a hole do I need for a 6×6 post?
A 6×6 post requires a 10″-diameter hole. Shovel a 6″ layer of gravel into the hole to provide drainage.
How big of a hole do I need for a 4×6 post?
For a six-foot-tall post, therefore, you would dig a hole two feet deep. The ideal diameter, meanwhile, should measure three times the width of the post. So, for a standard 4×4, the ideal hole would span twelve inches across.
