Allow the water to percolate down through the soil before attempting to dig out the hole using a post hole digging shovel, also called a clamshell shovel. To make digging the pilot holes easier, use a tile shovel. It will slice through grass and clay more easily than other shovel types.
Is a post hole digger worth it? While that won’t make a lot of difference if you have loamy, soft soil to begin with, for those who have hard-packed clay soils it certainly does. If your soil is very solid, or has a lot of rocks, a post hole digger is an essential tool to have.
What are post hole diggers called? A post hole clam-shell digger, also called post hole pincer or simply post hole digger, is a tool consisting of two articulated shovel-like blades, forming an incomplete hollow cylinder about a foot long and a few inches wide, with two long handles that can put the blades in an “open” (parallel) position or a “closed” …
What is the best tool for digging post holes? You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger.
Do manual post hole diggers work? For long swathes of new fencing, manual post hole diggers are a lot of work, but they are much more efficient than digging holes out with a spade and also give you neater edges so if you decide to use cement to set your fence posts, you’ll have a better set a the base as a result with less soil dilution on the edges.
Whats the difference between a post hole digger and auger? Q: What is the difference between an auger and a post hole digger? The difference between the two is in how they dig holes. You thrust a traditional post hole digger into the ground and remove the soil between the scoops. An auger “screws” into the ground and transports dirt along the blade up to the surface.
How do you dig a post hole in hard clay? – Related Questions
How deep should fence post holes be?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How deep can you dig with a post hole auger?
If you’re wondering how deep can a post-hole digger dig, the answer depends on the application and the tool. Most augers dig about 3 feet deep, but an extension rod can be used to gain another 12 inches of depth.
How deep can a manual post hole digger go?
Post hole diggers have a maximum effective depth of about 3/4 of their handle length, so a five foot pair will dig about 3 1/2 half deep. Very hard earth like clay is extremely difficult to dig with a manual pair of post hole diggers.
Will a post hole auger cut through roots?
Post hole diggers are not capable of cutting through large roots, and it is time consuming to try and chop the root out by hand. The most effective method of installing a post through a root is to drill through it.
How big of a hole do you need for a 4×4 post?
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter.
How deep should a 8 foot fence post be?
For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
What is the fastest way to dig a hole in a shovel?
How do you dig holes quickly?
Are petrol post hole diggers any good?
Are petrol augers actually any good? YES, I’ve used one to drill out for over 100 posts once in a day. Try doing that by hand! Not only that, it’s such a uniform sized hole you create that you can accurately calculate how much concrete you’ll need for posts over a long run of holes so a real advantage all round.
How do you dig a post hole in the winter?
How do you use a hand post hole digger?
What is a clamshell digger?
A clamshell digger (also called a post hole digger) is a good tool for this type of work. The clamshell digger is essentially two shovels hinged together at the top of the blades. It works like a combination shovel and tongs. To use the tool, push the handles together, then plunge the blades into the dirt.
Should fence posts be set in concrete?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
Why do fence posts rot at ground level?
Wood fence posts will rot due to prolonged exposure to moisture in the soil.
Can you set a post with dry concrete?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
Will an auger go through rock?
Augers are very powerful machines with a lot of torque that can throw you like a sack of potatoes if the auger bit encounters a rock or a root. If your soil is loamy or sandy, you too can drill 30 holes in a day’s worth of rental. But rocky ground or heavy clay can stymie even the most powerful auger.
How long does it take to dig a post hole with an auger?
Augers are available for rent at tool rental centers at a cost of around $60 a day. Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.
How long does it take to dig a 6 foot hole by hand?
This means it takes 4.24 minutes to dig a 6 foot deep hole of 16 inches diameter.
How do you dig fence posts in hard ground?
- Step 1: String your line and pound the stakes. …
- Step 2: Carve out a soil divot with a spade. …
- Step 3: Loosen earth with a tile shovel. …
- Step 4: Use your clamshell digger. …
- Step 5: Use a reciprocating saw on large roots. …
- Step 6: Dislodge rocks with a digging bar. …
- Step 7: Tamp the soil with the other end.
Can I dig a post hole with a shovel?
With the turf removed, a long-handled shovel does a good job of removing the dirt. Dig with the blade plumb and the handle pushed forward to keep the walls of the hole straight up and down.
Is Clay easier to dig wet or dry?
Wet clay isn’t much easier to work with, because it’s dense, sticky and difficult to dig out without the shovel becoming stuck. The best way to dig in clay requires loosening it first so you can remove clods of clay from the hole without it sticking to your tools.
How big of a hole do I need for a 6×6 post?
A 6×6 post requires a 10″-diameter hole. Shovel a 6″ layer of gravel into the hole to provide drainage.
How do you dig thick roots?
By keeping the edge of your shovel or spade sharp, you can cut through smaller roots. But when they are thicker than your finger, you will want to use a better tool. If your hole is shallow, a cheap hatchet works well. If the root is really big, a saw may be the easiest thing to use.
Can you dig a post hole with a shovel?
With the turf removed, a long-handled shovel does a good job of removing the dirt. Dig with the blade plumb and the handle pushed forward to keep the walls of the hole straight up and down.
How big of a hole does a post hole digger make?
Post hole diggers have a maximum effective depth of about 3/4 of their handle length, so a five foot pair will dig about 3 1/2 half deep. Very hard earth like clay is extremely difficult to dig with a manual pair of post hole diggers. A rock bar may work on dry clay.
