How deep should fence posts be?

As a general rule of thumb one-third of your post should be underground, the other two-thirds above. Let’s take a standard 6foot (72 inches) fence as an example. You will need a 9foot (108 Inches) post so that 3ft (35 inches) can be underground and 6ft can be above ground.

Do gas powered post hole diggers work? If your soil is hard, compacted, and requires extra power to dig through it, the gas DC HOUSE post hole digger is an ideal pick, with enough heft behind it to easily dig through tough soil.

What fuel does a predator auger use?

How do you use a gas powered post hole digger?

What kind of post hole digger do I need?

What is the best gas post hole digger?

How deep should fence posts be? – Related Questions

How big of a hole do you need for a 4×4 post?

The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter.

Is buying an auger worth it?

An auger gets the job done quicker than a shovel while allowing the operator to stand upright. Because the auger is meant to be held stationary as the hole is bored, there is less stress placed on the hands and arms, as well. For health reasons alone, augers are a worthwhile investment.

Can an auger dig through frozen ground?

The frost ended up being about 2.5 feet deep. With the nearly 3,000 pounds of down pressure we were able to auger post holes in frozen ground much easier than without using it. I hope this demonstration proves that with the proper equipment it is easy to dig through frozen ground.

Do manual post hole diggers work?

For long swathes of new fencing, manual post hole diggers are a lot of work, but they are much more efficient than digging holes out with a spade and also give you neater edges so if you decide to use cement to set your fence posts, you’ll have a better set a the base as a result with less soil dilution on the edges.

What is the difference between a post hole digger and an auger?

Post hole diggers focus on one task – they dig holes for posts, whereas a hole auger is suited for a wide variety of tasks around the garden. Post hole diggers rely on more work than a hole auger, these heavy hand tools are basically thrown hard into the soil with force then lifted out.

Will an auger go through rock?

Augers are very powerful machines with a lot of torque that can throw you like a sack of potatoes if the auger bit encounters a rock or a root. If your soil is loamy or sandy, you too can drill 30 holes in a day’s worth of rental. But rocky ground or heavy clay can stymie even the most powerful auger.

What is the easiest way to dig a post hole?

There’s no question about it — the fastest and easiest way to dig post holes is to use a gas-powered earth auger. Fill the tank with gas, position the auger on the ground, fire it up, hold on tight and watch the soil come streaming out of the hole.

Are petrol post hole diggers any good?

Are petrol augers actually any good? YES, I’ve used one to drill out for over 100 posts once in a day. Try doing that by hand! Not only that, it’s such a uniform sized hole you create that you can accurately calculate how much concrete you’ll need for posts over a long run of holes so a real advantage all round.

Will a post hole auger cut through roots?

Post hole diggers are not capable of cutting through large roots, and it is time consuming to try and chop the root out by hand. The most effective method of installing a post through a root is to drill through it.

How deep can you dig with a post hole digger?

Post hole diggers have a maximum effective depth of about 3/4 of their handle length, so a five foot pair will dig about 3 1/2 half deep. Very hard earth like clay is extremely difficult to dig with a manual pair of post hole diggers. A rock bar may work on dry clay.

How deep can a one man auger dig?

The available depths for an auger are generally 3 and 4 feet–but there are augers that exist that allow you to drill with more width and depth. Those wielding a one-man auger shouldn’t use it for any holes exceeding 8 inches in diameter. Whereas two-man augers get the job done for a maximum of 18 inches in diameter.

How many bags of cement do I need for a fence post?

1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.

Should fence posts be set in concrete?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

Why do fence posts rot at ground level?

Wood fence posts will rot due to prolonged exposure to moisture in the soil.

How deep should I bury a 10 foot post?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

How long does it take to dig a post hole with an auger?

Augers are available for rent at tool rental centers at a cost of around $60 a day. Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.

Can you use an auger in wet soil?

Especially if conditions are wet, the grass and vegetation may clog the end of the auger, sticking in place and making it impossible for the blades to get a grip on the soil below. Save yourself some time (and your auger a little trouble) by using a shovel to remove sod before you drill.

How big of an auger do I need?

To choose the auger that best fits your needs, consider how you’ll use it. If you plan on only using your auger to plant plugs, for instance, then a 2- or 3-inch auger will fit your needs. If you anticipate the need to bury stakes or set small posts, then you may prefer a 4-inch auger or another, larger size.

What’s the best way to dig a hole in frozen ground?

Can you dig post holes in winter?

“You can dig a hole in any kind of frozen conditions this way, even if the frost is down 2 feet,” he says. “After the fire has burned awhile, you can dig out the thawed ground underneath it, and if it’s not deep enough for your post hole, you can build another fire to thaw it on down.

How do you dig holes in winter?

How do you dig a post hole in hard ground?

What is a clamshell digger?

A clamshell digger (also called a post hole digger) is a good tool for this type of work. The clamshell digger is essentially two shovels hinged together at the top of the blades. It works like a combination shovel and tongs. To use the tool, push the handles together, then plunge the blades into the dirt.

What do you use to dig holes in a fence post?

Do augers work in rocky soil?

For drilling in rocky soils, always recommend heavy-duty augers to avoid damage. These augers are equipped with a more durable tooth and side cutting blades as well as heavy-duty flighting.

Will an auger work in wet soil?

Especially if conditions are wet, the grass and vegetation may clog the end of the auger, sticking in place and making it impossible for the blades to get a grip on the soil below. Save yourself some time (and your auger a little trouble) by using a shovel to remove sod before you drill.

What brand auger is best?

Which auger is best?