How deep should a 12 foot post be in the ground?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

Is a post hole digger worth it? While that won’t make a lot of difference if you have loamy, soft soil to begin with, for those who have hard-packed clay soils it certainly does. If your soil is very solid, or has a lot of rocks, a post hole digger is an essential tool to have.

What is the best tool for digging post holes? You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger.

What are post hole diggers called? A post hole clam-shell digger, also called post hole pincer or simply post hole digger, is a tool consisting of two articulated shovel-like blades, forming an incomplete hollow cylinder about a foot long and a few inches wide, with two long handles that can put the blades in an “open” (parallel) position or a “closed” …

Should I use an auger or post hole digger? Post hole diggers focus on one task – they dig holes for posts, whereas a hole auger is suited for a wide variety of tasks around the garden. Post hole diggers rely on more work than a hole auger, these heavy hand tools are basically thrown hard into the soil with force then lifted out.

How deep should fence posts be? As a general rule of thumb one-third of your post should be underground, the other two-thirds above. Let’s take a standard 6foot (72 inches) fence as an example. You will need a 9foot (108 Inches) post so that 3ft (35 inches) can be underground and 6ft can be above ground.

How deep should a 12 foot post be in the ground? – Related Questions

How big of a hole do you need for a 4×4 post?

The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter.

Do manual post hole diggers work?

For long swathes of new fencing, manual post hole diggers are a lot of work, but they are much more efficient than digging holes out with a spade and also give you neater edges so if you decide to use cement to set your fence posts, you’ll have a better set a the base as a result with less soil dilution on the edges.

Is it easier to dig wet or dry soil?

Soil that’s turned over when wet will form clods that will be very difficult to break apart later, Trinklein said. This is because wet soil is more easily compacted than dry soil. He recommends the “baseball test” before you start digging.

How deep can a post hole digger dig?

Post hole diggers have a maximum effective depth of about 3/4 of their handle length, so a five foot pair will dig about 3 1/2 half deep. Very hard earth like clay is extremely difficult to dig with a manual pair of post hole diggers.

Will a post hole auger cut through roots?

Post hole diggers are not capable of cutting through large roots, and it is time consuming to try and chop the root out by hand. The most effective method of installing a post through a root is to drill through it.

Can you dig a post hole with a shovel?

With the turf removed, a long-handled shovel does a good job of removing the dirt. Dig with the blade plumb and the handle pushed forward to keep the walls of the hole straight up and down.

What size auger do I need for fence posts?

Will an auger go through rock?

Augers are very powerful machines with a lot of torque that can throw you like a sack of potatoes if the auger bit encounters a rock or a root. If your soil is loamy or sandy, you too can drill 30 holes in a day’s worth of rental. But rocky ground or heavy clay can stymie even the most powerful auger.

Can you use an auger in wet soil?

Especially if conditions are wet, the grass and vegetation may clog the end of the auger, sticking in place and making it impossible for the blades to get a grip on the soil below. Save yourself some time (and your auger a little trouble) by using a shovel to remove sod before you drill.

How many bags of cement do I need for a fence post?

1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.

Should fence posts be cemented in?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

Is 2 feet deep enough for fence posts?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

Why do fence posts rot at ground level?

Wood fence posts will rot due to prolonged exposure to moisture in the soil.

Should wooden fence posts be set in concrete?

At Hercules Fence, we hear the same questions over and over, perhaps none more than “Should my Fence Posts be set in Concrete?” The simple answer is yes. It doesn’t matter if it is a do-it-yourself (DIY) project or a professional installation, wood fence or vinyl fence, your fence posts should be set in concrete.

Can you set a post with dry concrete?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

How do you dig holes quickly?

Are petrol post hole diggers any good?

Are petrol augers actually any good? YES, I’ve used one to drill out for over 100 posts once in a day. Try doing that by hand! Not only that, it’s such a uniform sized hole you create that you can accurately calculate how much concrete you’ll need for posts over a long run of holes so a real advantage all round.

How do you dig a post hole in the winter?

How do you soften soil before digging?

What is the fastest way to dig a hole in a shovel?

How do you soften the ground to dig holes?

If you’re planning to put in a much longer fence line, soften the soil by digging pilot holes 6 to 10 inches deep then fill each with water from a garden hose. Allow the water to percolate down through the soil before attempting to dig out the hole using a post hole digging shovel, also called a clamshell shovel.

How do you dig a post hole in hard ground?

How do you make a homemade auger?

How do you dig a fence post next to your house?

Typically, in part to ensure that posts lodge below the frost line, experts call for a hole deep enough to submerge the bottom third of the post below ground. For a six-foot-tall post, therefore, you would dig a hole two feet deep. The ideal diameter, meanwhile, should measure three times the width of the post.

Do post hole diggers work?

Digging holes for fence posts or footings requires a different tool because the holes should be deep and cylindrical with sides that are flared at the bottom. A clamshell digger (also called a post hole digger) is a good tool for this type of work.

Do manual post hole diggers work?

For long swathes of new fencing, manual post hole diggers are a lot of work, but they are much more efficient than digging holes out with a spade and also give you neater edges so if you decide to use cement to set your fence posts, you’ll have a better set a the base as a result with less soil dilution on the edges.

Can you dig a post hole with a shovel?

With the turf removed, a long-handled shovel does a good job of removing the dirt. Dig with the blade plumb and the handle pushed forward to keep the walls of the hole straight up and down.

Can you dig a hole with an ice auger?