How big of a hole do you need for a 4×4 post?

12 inches

The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter.

What is the best fence post digger?

Who makes the best gas auger?

Should I use an auger or post hole digger? Post hole diggers focus on one task – they dig holes for posts, whereas a hole auger is suited for a wide variety of tasks around the garden. Post hole diggers rely on more work than a hole auger, these heavy hand tools are basically thrown hard into the soil with force then lifted out.

Does Stihl make an ice auger? The STIHL BT 130 auger features fuel efficiency and high torque at low RPM – all at a value price. Its lightweight construction allows you to drill with better control from an upright position.

How big of a hole do you need for a 4×4 post? – Related Questions

How deep can an earth auger dig?

An auger can drill holes as deep as 95 feet and as shallow as 3 feet. However, once the depth goes beyond 95 feet, you can add an extension rod to the auger.

Which auger is best?

Do augers work in rocky soil?

For drilling in rocky soils, always recommend heavy-duty augers to avoid damage. These augers are equipped with a more durable tooth and side cutting blades as well as heavy-duty flighting.

How do you dig a 4 foot post hole?

How big of an auger do I need?

To choose the auger that best fits your needs, consider how you’ll use it. If you plan on only using your auger to plant plugs, for instance, then a 2- or 3-inch auger will fit your needs. If you anticipate the need to bury stakes or set small posts, then you may prefer a 4-inch auger or another, larger size.

Will a post hole auger cut through roots?

Post hole diggers are not capable of cutting through large roots, and it is time consuming to try and chop the root out by hand. The most effective method of installing a post through a root is to drill through it.

How deep should fence posts be?

As a general rule of thumb one-third of your post should be underground, the other two-thirds above. Let’s take a standard 6foot (72 inches) fence as an example. You will need a 9foot (108 Inches) post so that 3ft (35 inches) can be underground and 6ft can be above ground.

Does Stihl make drills?

STIHL augers and drills are lightweight and ready to use – and possess the kind of technology that prompt professional landscapers and contractors to choose STIHL for their handheld outdoor power equipment needs.

How deep should a 10 foot post be in the ground?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

Should fence posts be set in concrete?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

How deep should a 8ft fence post be?

For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.

Can an auger go through clay?

Augers are also great for soil that is tough to dig. Heavy clay soils, which tend to clump and stick to shovels, are no problem with an auger.

Can one person use an auger?

What is an auger used for? A small auger with a 2- to 3-inch diameter bit can be used to plant bulbs or install small poles. A one-man auger with a 6-inch auger bit can be used to dig holes for steel fence posts.

How long does it take to drill a hole with an auger?

Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.

How do you keep auger batteries warm?

What is the fastest ice auger?

As far as we can tell, the Trophy Strike 120V Lithium Ion Ice Auger is the fastest ice auger in the world!

What is the best size auger for ice fishing?

For gas and electric augers, the best overall size is the 8-inch auger. It’s a large enough hole for most fish, and you can drill overlapping holes for a larger hole. For hand augers, a 6-inch auger would be the best overall size for cutting through the ice if you’re drilling numerous holes.

How do you dig up hard rocky soil?

Will a 2 man auger go through rock?

Augers are very powerful machines with a lot of torque that can throw you like a sack of potatoes if the auger bit encounters a rock or a root. If your soil is loamy or sandy, you too can drill 30 holes in a day’s worth of rental. But rocky ground or heavy clay can stymie even the most powerful auger.

Can an auger go through gravel?

Hold the auger firmly with both hands. Press the trigger throttle slowly to start the auger turning and to begin drilling through the gravel and soil. Apply downward pressure as the auger turns.

How deep should a 4 foot fence post be?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

How long does it take to dig a 4 foot hole?

Pace yourself, as a steady pace is always best For instance, digging a hole about 4′ deep, by 3′ wide, by 4′ long takes anywhere from 1 hour to 4 hours. It depends on the ground conditions, and the ability of who’s digging the hole.

Is it easier to dig wet or dry soil?

Soil that’s turned over when wet will form clods that will be very difficult to break apart later, Trinklein said. This is because wet soil is more easily compacted than dry soil. He recommends the “baseball test” before you start digging.

What is the best tool for digging holes?

How far should I dig for a fence post?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

Do post hole diggers work?

Digging holes for fence posts or footings requires a different tool because the holes should be deep and cylindrical with sides that are flared at the bottom. A clamshell digger (also called a post hole digger) is a good tool for this type of work.

How do you dig holes in a fence post?