Can you use a regular auger for ice fishing?

Any ice angler who fishes through medium-thicknesses of ice, for fish that will fit through a 6-or-8-inch hole ought to find the drill-auger superior to just about any other option. Even if you need a gasoline or propane auger for some of your fishing applications, you’ll still find a drill-powered auger useful.

How big of a auger do I need for fence post? Therefore, the 4×4 post will likely fit into a hole drilled by a 6″ diameter auger. However, this leaves less than 1/2″ at the widest part for cement or dirt to be packed in to secure the post. For this reason, an 8″-10″ auger would work much better and provide the necessary fill space for cement or tamping.

Can you use an auger to drill post holes? A one-man auger with a 6-inch auger bit can be used to dig holes for steel fence posts. A one- or two-man auger with a 10-inch bit can be used to dig holes for a 4 x 4 wooden fence post or larger plants.

Does Stihl make an ice auger? The STIHL BT 130 auger features fuel efficiency and high torque at low RPM – all at a value price. Its lightweight construction allows you to drill with better control from an upright position.

How do you make a post hole auger?

What size hole should I dig for a 4×4 post?

The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.

Can you use a regular auger for ice fishing? – Related Questions

How wide should a hole be for a 4×4 post?

Project Instructions Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

Should I use an auger or post hole digger?

Post hole diggers focus on one task – they dig holes for posts, whereas a hole auger is suited for a wide variety of tasks around the garden. Post hole diggers rely on more work than a hole auger, these heavy hand tools are basically thrown hard into the soil with force then lifted out.

Can an ice auger be used as a post hole auger?

I’ve used my old Jiffy many times for digging post holes. If you hit a big tree root or rock it gets a little hairy but for the most part works great! I just use an old ice blade and haven’t had any trouble. I had the same thought so last week I bought the earth auger at menards, brought it home, hooked up to my Jiffy.

What is the difference between a post hole digger and an auger?

The difference between an auger and a digger comes down to the shape. An auger basically looks like a giant corkscrew, and they create a hole by pushing the dirt down. Post hole diggers look like two shovels facing each other, and they create a hole by scooping and removing the dirt.

Does Stihl make drills?

STIHL augers and drills are lightweight and ready to use – and possess the kind of technology that prompt professional landscapers and contractors to choose STIHL for their handheld outdoor power equipment needs.

What is a drill auger?

Simply put, an auger is a spiral-shaped tool that is used to drill holes into the ground and other surfaces or materials. The spiraling metal shaft with a blade at the end of the device is known as a “flighting”. The flighting rotates to scrape, cut, or siphon out drilled materials.

How do you make homemade auger?

How do I make a simple auger?

How long does it take to dig a post hole with an auger?

Augers are available for rent at tool rental centers at a cost of around $60 a day. Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.

How deep should a 10 foot post be in the ground?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

Should fence posts be set in concrete?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

How many bags of concrete do I need for a 4×4 post?

How much gravel goes in the bottom of a post hole?

How much gravel do I put in the hole? You should put approximately 2″ to 4″ of gravel in the bottom of the hole making sure that the Post stands 6′ 4″ tall from the ground to the top of the post.

Can you set a post with dry concrete?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

How do I keep my post level while concrete dries?

You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.

What is the easiest way to dig a post hole?

There’s no question about it — the fastest and easiest way to dig post holes is to use a gas-powered earth auger. Fill the tank with gas, position the auger on the ground, fire it up, hold on tight and watch the soil come streaming out of the hole.

Will a post hole auger cut through roots?

Post hole diggers are not capable of cutting through large roots, and it is time consuming to try and chop the root out by hand. The most effective method of installing a post through a root is to drill through it.

How deep can you dig with a post hole auger?

How Deep Can Power Augers Dig? Most augers dig about 3 ft. deep, but for deeper holes, ask for an extension rod (Photo 5), usually for no extra fee. Deeper holes are typically required for footings for decks or other structures attached to houses located in very cold climates where frost depths exceed 3 ft.

Can I use an earth auger for ice?

We used a earth auger powerhead and a homemade collar to attach a hand auger drill to it for a few years, it worked. That would be my suggestion if you want to use it for ice, find a used hand auger and make an adapter collar so it fits the shaft coming out of the powerhead of the earth auger. It’s an option!

How do you use a fence post auger?

How big of a hole do I need for a 6×6 post?

A 6×6 post requires a 10″-diameter hole. Shovel a 6″ layer of gravel into the hole to provide drainage.

How big of a hole do I need for a 4×6 post?

For a six-foot-tall post, therefore, you would dig a hole two feet deep. The ideal diameter, meanwhile, should measure three times the width of the post. So, for a standard 4×4, the ideal hole would span twelve inches across.

What is the diameter of a post hole digger?

Best Heavy-Duty Post Hole Digger It also comes with three auger bits ranging from six to 12 inches in diameter.

How much concrete do I need for a 4×4 fence post?